Practical Guide to Checking the Quality of PC Imitation Stone Tiles

PC imitation stone tiles are widely used in urban construction as paving materials. But with a competitive market, it's not easy to tell if the PC imitation stone tiles you choose are high - quality. Here are 4 simple ways to check their quality.

​

1.Look at the Surface​

Check the color first. A nice color often means better pigments, which cost more.​

To test strength, use a steel nail or sharp tool to scratch or tap the surface. If much of the surface peels off, the tile has low density.​

2. Weigh and Compare​

Hold the PC imitation stone tile and weigh it. It's best to compare tiles of similar size.​

Heavier tiles are usually better. PC imitation stone tiles are made with heavy materials like cement, stones, and gravel. If a tile is light but similar in size, it uses less material and is lower in quality.​

3. Do a Drop Test​

Drop the PC imitation stone tile and look at the broken middle part.​

Check if the internal materials are evenly distributed and if the raw materials have high density. Tiles with too little material break easily and have low strength.​

4. Listen to the Sound​

Hold the PC imitation stone tile close to your ear and tap its surface.​

A crisp sound means good strength and even cement distribution. But if the sound is too crisp, the tile has too much material, lacks toughness, and breaks easily.

​

These are 4 ways to check the quality of PC imitation stone tiles. Try them when you want to buy high - quality floor tiles!